raspberry pi 2 is tested in compressed air vessel working at 5bar

copyright (C) 2011-2017 iesensor.com

Recently, as a byproduct of exp work in Ox Uni,  I tested raspberry pi 2 works at 5 bar, it could work at higher pressure but not tested.

All the rpi 2 use no electrolytic capacitor (all components are supposed to be pressure tolerant), so it is potentially working at higher pressure than atm.  Now it is confirmed.

Also, UART (RT and TX) pins are used to communicate between two pi. It works with 1 meter cable at 115200. amplifier_HP_testing

BSD documentation licensed Free for non-commercial usage only
Author: Qingfeng XIA
copyright (C) 2011-2017
http://www.iesensor.com
please keep the original link in your reference.
http://www.iesensor.com/blog/2015/03/10/raspberry-pi-2-is-tested-in-compressed-air-vessel-working-at-5bar/
This entry was posted in Sensor. Bookmark the permalink.